EAW UMX.96 Music Mixer User Manual


 
Eastern Acoustic Works One Main Street Whitinsville, MA 01588 tel 800 992 5013 / 508 234 6158 fax 508 234 8251 www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. February 2008
UMX.96 Specifications group · S
DIGITAL CONSOLE
INPUT POWER
1000W, 90-264V AC, 47-63 Hz
(dual redundant standard)
SAMPLE RATES
44.1k, 48k, 88.2k, 96k
FADERS
100mm motorized optical P & G
48 input + 8 VCA + 3 LRC + 1 selected channel
1024 steps, - inf to + 10dB
LATENCY
3.1ms, speaker processor bypassed
3.6ms, speaker processor engaged
(both analog mic in to analog main out)
DSP RESOLUTION
32 and 40-bit floating point
FREQUENCY RESPONSE
20Hz -20kHz, +/-0.5dB
THD + N
<0.004%, mic in to main out @ 1kHz
typical use: input = -15 dBu; mic gain = +31 dB
DYNAMIC RANGE
DA: 110 dB, main out @ 96kHz
DA: 114 dB main out @ 48kHz
AD+DA: 105 dB, mic in to main out @ 96kHz
AD+DA: 109 dB, mic in to main out @ 48kHz
(both up to +45 dB mic gain)
VOLTAGE GAIN
89 dB, mic in to main out
RESIDUAL OUTPUT NOISE
-90 dBu, 20Hz - 20kHz
(all inputs muted)
PHANTOM POWER
+48V, digitally controlled on individual channels
MAX INPUT LEVEL
+30 dBu, pad in
PAD
23 dB, digitally controlled
MIC PRE GAIN
+15 to +70 dB, 1 dB steps, pad out
-8 to +47 dB, 1 dB steps, pad in
(both digitally controlled)
INPUT IMPEDANCE
1.5k Ohm, mic in, pad out
3.1k Ohm, mic in, pad engaged
10k Ohm, inserts, returns, and stereo inputs
EIN
-130 dBu, 150 Ohm source, pad out
-127 dBu, any input impedance, pad in
DIMMENSIONS
PRELIMINARY