Filter
Top Products
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 3/2006
Part Number 534671 Rev B
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/553-5992 or 402/467-5321
For technical assistance, contact Technical Support at:
800/392-3497 or 952/736-4656
Specifications subject to change without notice.
Dimension Drawing:
Frequency Response: Wiring Diagram:
Architects’ and Engineers’
Specifications:
The microphone shall be an omni directional dynamic type with
wide-range response uniform from 80 to 13,000 Hz. It shall
have a nonmetallic diaphragm and an internal pop filter and
magnetic shield to prevent dust and magnetic particles from
reaching the diaphragm. The impedance shall be such that the
microphone will match 50-, 150- and 250ohm inputs. The line
shall be balanced to ground and phased. The output level shall
be 2.8 mV/pascal. The magnetic circuit shall be nonwelded and
employ a neodymium alloy magnet. The microphone shall have
a maximum diameter of 36 mm (1.42 in.), a length of 148 mm
(5.84 in.) and a weight of 170 g (6 oz). Finish shall be
nonreflecting fawn beige (635N/D) or semi gloss black (635N/
D-B). The microphone shall have a built-in XLR-type connector,
and shall include a 5/8”-27 thread stand adapter. The
Electro-Voice 635N/D and 635N/D-B are specified.
635N/D Part Number:
• 6352332
635N/D-B Part Number:
• 6352333