Filter
Top Products
M2 High-Performance Stereo Mixing Console
M2 High-Performance Stereo Mixing Console
2
Architects' And Engineers’
Specifications
The mixer shall have (12 or 16) input chan-
nels with top-mounted input and output con-
nectors.
The input channels shall have a 3-pin XLR-
type connector with universal phantom
power and a balanced ¼-inch high-imped-
ance line input. These channels will have a
three-band EQ with
+15 dB of boost/cut with
a semi-parametric mid sweepable from 250
– 5,000 Hz. These channels shall have pre-
fade listen (PFL), a mute switch and a 60-
mm fader. All input channels will have four
aux sends. Auxs 1 and 2 are fixed pre-fader
and auxs 3 and 4 are fixed post-fader.
The master section shall have four aux mas-
ter sends, each with an LED overload indi-
cator and after-fade listen (AFL). There shall
be two stereo, mono-compatible aux returns
with level and balance controls. There shall
be two 10-segment LED meters that can
monitor either the master outputs or the
mono/PFL signals. There shall be separate
record output and tape playback controls and
a headphone amplifier with a gain control.
The master outputs and the mono output shall
be controlled with 60-mm faders and have
mute switches.
The mixer shall be the Electro-Voice M2/12
and M2/16.
Uniform Limited Warranty
Electro-Voice products are guaranteed
against malfunction due to defects in mate-
rials or workmanship for a specified period,
as noted in the individual product-line
statement(s) below, or in the individual prod-
uct data sheet or owner’s manual, beginning
with the date of original purchase. If such
malfunction occurs during the specified pe-
riod, the product will be repaired or replace
(at our option) without charge. The product
will be returned to the customer prepaid.
Exclusions and Limitations: The Limited
Warranty does not apply to: (a) exterior
finish or appearance; (b) certain specific
items described in the individual product-line
statement(s) below, or in the individual prod-
uct data sheet or owner’s manual; (c) mal-
function resulting from use or operation of
the product other than as specified in the
product data sheet or owner’s manual; (d)
malfunction resulting from misuse or abuse
of the product; or (e) malfunction occurring
at time after repairs have been made to the
product by anyone other than Electro-Voice
or any of its authorized service representa-
tives.
Obtaining Warranty Service: To obtain
warranty service, a customer must deliver the
product, prepaid, to Electro-Voice or any of
its authorized service representatives to-
gether with proof of purchase of the product
in the form of a bill of sale or receipted in-
voice. A list of authorized service represen-
tatives is available from Electro-Voice at 600
Cecil Street, Buchanan, MI 49107 (616/695-
6831 or 800/234-6831). Incidental and
Consequential Damages Excluded: Prod-
uct repair or replacement and return to the
customer are the only remedies provided to
the customer. Electro-Voice shall not be li-
able for any incidental or consequential dam-
ages including, without limitation, injury to
persons or property or loss of use. Some
states do not allow the exclusion or limita-
tion of incidental or consequential damages
so the above limitation or exclusion may not
apply to you. Other Rights: This warranty
gives you specific legal rights, and you may
also have other rights, which vary from state
to state.
Service and repair address for this product:
Electro-Voice, 600 Cecil Street, Buchanan,
MI 49107 (616/695-6831 or 800/234-6831)
or Telex Communications, West 1
st
Street,
Blue Earth, MN 56013 (507-326-3205).
Specifications subject to change without
notice.
Electro-Voice Electronics are guaranteed
against malfunction due to defects in mate-
rials or workmanship for a period of three
(3) years from the date of original purchase.
Additional details are included in the Uni-
form Limited Warranty Statement.