Filter
Top Products
RE97-2Tx Low Profile, Head-worn, Omni-directional, Condenser Microphone
Application Notes (continued):
Headband and Microphone Placement (continued):
Place the earloops on the user’s ears and then pull the sliders
apart, towards the ears, tightening until the headband fits firmly
yet comfortably (Figure 3). Adjustments may be made for
additional comfort or stability by gently bending the earloops
(Figure 4).
Microphone Positioning:
The ideal placement of the microphone is ½ inch behind the corner of the mouth and ½ to 1 inch away
from the face. The signal-to-noise ratio is optimized and breath noise is minimized in this configuration
(Figure 5).
Figure 4. Changing the Earloop Shape
Figure 3. Adjusting the Headband
Figure 5. Suggested Placement
3