M90 Modena – Owner’s Manual – Ver: 2.21 8 Elmwood Amps
CHANNEL 2
Channel 2
• Press the Channel switch on the foot switch so that the led will light up to activate
Channel 2.
As on Channel 1 there are many possibilities to tailor the sound by adjusting; Gain,
Volume, Treble, Mid and Bass. At lower Gain settings there is the same smooth, touch
sensitive feel/sound as on Channel 1.
By activating Drive;
• Press the Drive switch on the foot switch so the led will light up
and having low gain setting - the drive knob can be turned up to achieve a competent
crunch/leadsound. With this setting you can go from bluesy break-ups to fat crunch and
lead simply by pressing the drive switch on the foot switch.
• Press the Drive switch on the foot switch so the led will go dark
When turning the Gain knob more clockwise; the gain will increase and the sound will
become more compressed. Even if the gain and compression increases - the string
definition and tone will remain. If setting the Gain knob to, say 12 o’clock, there will be a
very potent rock/hard rock rhythm sound.
With this gain setting you can again activate Drive
• Press the Drive switch on the foot switch so the led will light up
and increase Drive settings for even more fat, singing lead tones.
Note: Avoid having Drive, Gain, and Channel 2 Volume set
to fully clockwise as it may cause oscillation due to the large
amount of gain.