Filter
Top Products
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.,
CORONA, CA 91720
PART NUMBER : 100V Version : 22-8572
120V Version : 22-8502
230V Version : 22-8562
240V Version : 22-8532
TYPE SPECIFICATION : PR 286
POWER REQUIREMENTS : 100V Version : 100VAC, 50/60Hz, 540W
120V Version : 120VAC, 60Hz, 540W
230V Version : 230VAC, 50Hz, 540W
240V Version : 240VAC, 50Hz, 540W
POWER AMPLIFIER SECTION :
POWER OUTPUT : 200W R.M.S.
RATED LOAD IMPEDANCE : 4Ω
DISTORTION AT 200 WATTS : Less than 1% @ 1kHz, below compression
Less than 1% @ 1kHz, maximum compression
SENSITIVITY : 1.03 Volts R.M.S.
INPUT IMPEDANCE : 22kΩ
DELTACOMP
TM
RANGE : 20dB.
PREAMP SECTION :
INPUT IMPEDANCE : XLR - 1.82kΩ
Phone - 18.2kΩ
Sensitivity for 200 watts : XLR - 2.9 mV R.M.S.
channel and master Phone - 29 mV R.M.S.
volume at maximum, all
tone control at “0”
EQUALIZER : For 3-band-EQ sections :
+/- 12dB at 130, 540 and 4200 Hz.
For 4-band-EQ section :
+/- 12 dB at 125, 320, 1000 and 3200 Hz.
Sensitivity for channel 500 mV R.M.S. (-6dBV).
inserts, Master volume
at maximum setting
Sensitivity for 130 mV R.M.S. (-18dBV).
Master volume and FX
return control at max.
PHYSICAL SPECIFICATIONS :
HEIGHT : 29 - 3/4 inches w/o casters (75.6 cm)
32 - 1/8 inches with casters (81.6 cm)
WIDTH : 21 - 11/16 inches (55.1 cm)
DEPTH : 12 inches (30.5 cm)
WEIGHT : 88 lbs. (40kg)
SPEAKER COMPLEMENT : 15” Fender
®
Special Design (P/N 048769)
Dual piezo horn (P/N 028813)
WARNING : NO USER SERVICEABLE PARTS INSIDE,
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
THIS EQUIPMENT CONFORMS TO
THE FOLLOWING DIRECTIVES :
EMC 89/336/EEC AND LV 73/23/EEC
KXR 200 SPECIFICATIONS