Filter
Top Products
Thank you for your purchase of a FISHMAN product. Please read these
instructions carefully. If you have any questions or problems, contact our
PRODUCT INFORMATION LINE at 508-988-9665.
The FISHMAN V-200 is the finest piezoelectric violin transducer avail-
able. It’s design is based on that of the FISHMAN V-100 with the added
benefits of the CARPENTER 1/4" Output Jack.
The V-200 is a bridge mounted, piezo-ceramic pickup. It senses string
vibrations via a single piezo element, fastened to the instrument's wing
slot with a patented floating mount.
The V-200 installs in minutes, with only minor alterations required. Its
low mass minimizes any damping or muting that could affect the instru-
ment's acoustic tone. The V-200 provides a natural, acoustic sound for
arco or pizz playing styles.
The CARPENTER JACK was designed by noted repairman Fred
Carpenter. This professional-quality 1/4" violin pickup jack, molded into
an attractive housing, attaches to the lower bout with chinrest hardware.
It makes a perfect mounting point for adding a microphone and does not
affect the instrument’s acoustic tone. It also makes it easy to use a cable
with a right angle plug. The CARPENTER JACK has become extremely
popular with many of today’s finest touring and session musicians.
PARTS
• V-200 Violin Pickup
• Carpenter 1/4” Output Jack
• Chinrest Adjustment Key
CAUTION
As might be expected of a high performance, vibration-sensing trans-
ducer, the FISHMAN V-200 should be handled with care, particularly dur-
ing installation. However, once installed as instructed below, this device
is well protected from abuse and should provide years of trouble-free
service.
V-200 PROFESSIONAL
2