Fostex Music Mixer Music Mixer User Manual


 
1. Preselect the program to which offset is to be setup.
The following example shows in the display that
program 2 have been selected.
2. Switch to the SETUP mode by pressing the SETUP
key.
In the initial setup, the [Sign. Set?] menu will be
displayed (If a different menu is displayed, rotate
the JOG dial to display the [Sign. Set?] menu.).
3. Then press the EXECUTE/YES key.
The display will change to [Sign. Chk] and the
presently set beat will be shown. In the initial setup,
the display will show that the first bar is set to 4/4
beat.
4. Rotate the JOG dial counter-clockwise.
The offset figure of the presently set bar is displayed
and in the initial setup, [-002BAR OFFSET] will be
displayed as shown below.
5. Press the EXECUTE/YES key.
Simultaneous with entering [Sign. Edit] mode, [2] of
-002BAR will blink and the BAR offset figure can then
be edited.
6. Enter the desired offset figure by rotating the JOG
dial, and then press the EXECUTE/YES key.
Any offset figure in the range of 2~9 can be input
(Example below show that [5] had been entered for
the BAR figure.). When the EXECUTE/YES key is
pressed after input of the above number, the offset
figure thus input will be setup and the display will
change to the [Sign. Set?] menu.
7. Exit from the SETUP mode by pressing the EXIT/NO
key.
Setup procedures for BAR/BEAT/CLK offset
<NOTE>: Offset setups can be executed for each program. The setup content will be
maintained even though power is switched off.
FOSTEX CORPORATION
3-2-35, Musashino, Akishima-shi, Tokyo 196-0021, Japan
FOSTEX CORPORATION OF AMERICA
15431, Blackburn Ave., Norwalk, CA 90650, U. S. A.
Blink
Blink
Blink
C
PRINTED IN JAPAN AUG. 1999 8288 675 000 FX.
SETUP
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
44.1kHz
CLK
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SETUP
BAR
44.1kHz
EXECUTE
/ YES
EXECUTE
/ YES
CLK
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SETUP
BAR
44.1kHz
SETUP
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
BAR
44.1kHz
CLK
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SETUP
BAR
44.1kHz
EXECUTE
/ YES
SETUP
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
BAR
44.1kHz
SETUP
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
44.1kHz
SETUP
DRIVE
AUTO A.PUNCH
SYNC OUT
CLK
SCSI
44.1kHz
CLK
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SMF
PGM
ABS
44.1kHz
CLK
SYNC OUT DRIVE
SCSI
AUTO A.PUNCH
SMF
PGM
ABS
44.1kHz
SETUP