Gemini CTRL-SIX DJ Equipment User Manual


 
35) PARAMETER 1: The PARAMETER 1 rotary knob adjusts the
value associated with Parameter 1 of the selected effect.
36) PARAMETER 2: The PARAMETER 2 rotary knob adjusts the
value associated with Parameter 2 of the selected effect.
37) BOOTH VOLUME rotary knob: The BOOTH VOLUME rotary
knob adjusts the volume of the BOOTH output.
38) CROSS FADER SLOPE: The CROSS FADER SLOPE rotary
adjustment allows you to alter how the channels come in and out
when the crossfader is used. When set to the RIGHT, when the
fader is moved, the channel will go from silent, to full volume very
quickly. When set to LEFT, the channel will go from silent, to full
volume gradually.
Troubleshooting
If you experience an error while using the unit, here are a few
explanations of those errors and how they can be corrected. For
a more complete troubleshooting guide, consult our website at
http://www.geminidj.com.
- Check the USB cable that is being used to connect your PC to
the CTRL-SIX.
- If the device is powered by an external power supply, make sure
that the unit is receiving power.
Specications
GENERAL:
Type of unit................................................. USB MIDI controller
Power................................................................. 5V DC Adaptor
USB-Powered
Power Consumption.................................................... 2.6 watts
Connector type....................................................... USB Type B
USB protocol support..................... 1.0, 1.1, and 2.0 (Hi-Speed)
Weight............................................................................ 3.88 lbs
1.8 kg
Dimensions......................................... 14 x 10.25 x 1.75 inches
360 x 260 x 45 mm
AUDIO:
Audio output.................................................. 2-channel (Stereo)
Output level........................................... 1.0 V RMS (1 kHz, 0dB)
Output connectors................................. Unbalanced RCA Type
Balanced XLR
Frequency response........................................... 20 Hz - 20 kHz
S/N ratio............................................................................. 80dB
Total harmonic distortion............................................... <0.05%
SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE
WITHOUT NOTICE FOR PURPOSE OF IMPROVEMENT.
Specications
Especicaciones • Caractéristiques techniques • Technische Daten
10
CTRL-SIX - EN
Additional Information