Filter
Top Products
Page 4
will glow, but talkover is off. When the MIC/TALKOVER SWITCH (12)
is in the top position, the mic and talkover will be on and the volume of
all sources except the Mic input are lowered by 16 dB. MIC LEVEL
(14) controls the level of the MIC.
8. CUE SECTION: By connecting a set of headphones to the HEADPHONE
(33) jack, you can monitor either CHANNEL 1 or CHANNEL 2. Move the
CUE SWITCH (24) to the left to monitor CHANNEL 1. Move the CUE
SWITCH (24) to the right to monitor CHANNEL 2. Use the CUE LEVEL
(5) control to adjust the headphone volume without effecting the
overall mix.
9. DISPLAY: The dual function DISPLAY (22) indicates either the
MASTER OUTPUT (3, 4) left and right levels or the CHANNEL 1 and
CHANNEL 2 input levels. You can choose the option you want by
pressing the DISPLAY (23) button.
NONO
NONO
NO
TETE
TETE
TE: When the
DISPLADISPLA
DISPLADISPLA
DISPLA
Y (22)Y (22)
Y (22)Y (22)
Y (22) is in the CHANNEL 1/
CHANNEL 2 display mode, by adjusting the individual
channel gain, you can increase or decrease the signal to
match the other channel’s signal. The channel slides and
crossfader have no effect on the display readings.
Specifications
INPUTS:
DJ Mic................................................................................1.5 mV 600 Ohm
Phono........................................................................................3 mV 47 kOhm
Line....................................................................................150 mV 27 kOhm
OUTPUTS:
Amp..................................................................................0 dB 1V 400 Ohm
Max..............................20V Peak to Peak
GENERAL:
Gain (Channels 1 - 2).................................................................0 to -20 dB
Frequency Response.........................................20 Hz - 20 kHz +/- 2 dB
Distortion..............................................................................................0.02%
S/N Ratio..........................................................................better than 80 dB
Talkover Attenuation..........................................................................-16 dB
Headphone Impedance....................................................................16 Ohm
Power Source................................................................115V/15V AC 7.5 W
230V/15V AC 7.5 W
Dimensions.......................................10” x 10” x 3” (254 x 260 x 84 mm)
Weight.....................................................................................5 lbs (2.3 kg)