Genz-Benz 80 LT Musical Instrument Amplifier User Manual


  Open as PDF
of 7
 
SHENANDOAH
®
STEREO 80LT
ENGINEERING SPECIFICATIONS
INPUTS
XLR Balanced input impedance: 2.2 k ohms
XLR Balanced input sensitivity: -60 to -30 dBV
¼” Unbalanced input impedance: 300 k ohms
¼” Unbalanced input sensitivity: -30 to +4 dBV
AMPLIFIER OUTPUT
Power at 4 ohm load: 40 watts per side RMS, 80 watts total
THD + N (preamp): <0.035%
THD + N (power amp): <0.07%
Frequency response: 20 Hz -20 kHz +/- 1dB
CHANNEL EQUALIZATION
Low frequency: 125 Hz shelving, +/-15dB
Mid frequency (sweep): 250 Hz - 5 kHz , peaking, +/-12dB
High frequency: 8 kHz shelving, +/-15dB
DIRECT OUTPUTS
XLR balanced output level: -30 dBV nominal
XLR balanced output impedance: 150 ohms
¼” unbalanced output level: +4 dBv nominal
¼” unbalanced output impedance: 1k ohm
DIGITAL EFFECTS
Processor type: WAVE FRONT™ STEREO DSP engine
Internal processing: 24 bit
A/D converter 24 bit - 64X oversampling
D/A converter: 24 bit - 128X oversampling
Dynamic Range: 80 dB
THD + N (1 kHz) <0.01%
Sampling rate: 48 kHz
Due to continuing product improvements and changes, all specications are subject to change without notice.
 previous