Filter
Top Products
5.
Figure 4
To attach the tail and neck block to the sides:
1.
Figure 3
Assembling Sides &
Blocks
Note: The tail and neck block should be flush
with the sound board and back layout lines.
This leaves extra material above the lines
that will be sanded flush later in construc-
tion.
Figure 4.
6.
Figure 5
Figure 5.
7.
8.
9. Steps 3–6
2.
Note: To reduce the chance of tear out
occurring, incise the scribed lines with a
marking knife before proceeding. Cut slowly,
especially when starting and finishing the
cuts.
3.
4.
.
Figure 3.