JBL C414B-XLS/ST Microphone User Manual


 
Amps
XTi Series
Amps
Features XTi Series
ı Integrated proprietary DSP with LCD front panel display
ı Accurate, uncolored sound with very low distortion for the
best in music and voice reproduction
ı Advanced protection circuitry guards against: shorted
outputs, open circuits, DC, mismatched loads, general
overheating, high-frequency overloads and internal faults
ı Extremely versatile, handling a wide range of speaker
impedances and outputs
ı Switch-mode universal power supply
ı Speaker presets for crossover frequencies, EQ, limiting,
and delay
ı All products fill 2U rack spaces and weigh under 17
pounds; weight sets a new standard in lightweight amps
(20% less)
ı Speakon® and binding post outputs, XLR inputs and loopthrus
ı Comprehensive LED status per channel
Minimum Guaranteed Power, 1 kHz XTi 1000 XTi 2000 XTi 4000 XTi6000
per channel, both channels driven
2 ohms Dual (per ch.) 700W** 1000W** 1600W** 3000W*
4 ohms Dual (per ch.) 500W* 800W* 1200W* 2100W
8 ohms Dual (per ch.) 275W* 475W* 650W* 1200W
Bridge-Mono, 4 ohms 1400W** 2000W** 3200W** 6000W
Bridge-Mono, 8 ohms 1000W* 1600W* 2400W* 4200W
*With 0.5% THD.**With 1% THD.
XTi Range
XTI1000
XTI serie amplifi er 2x 500W/4 ohm, DSP speaker presets 679
XTI2000
XTI serie amplifi er 2x 800W/4 ohm, DSP speaker presets 945
XTI4000
XTI serie amplifi er 2x 1200W/4 ohm, DSP speaker presets € 1.325
XTI6000
XTI serie amplifi er 2x 2100W/4 ohm, DSP speaker presets € 2.485
23
Speaker Tunings
ı JBL loudspeaker presets specifically tailored for
use with Crown’s XTi Series of power amplifiers
are available in the form of System Architect device
files.