Filter
Top Products
1. Speaker Assignment
Press the SPEAKER ASSIGNMENT button and the Display changes to a menu
showing the seven selectable sounds. Piano sounds are shown on left side. Organ
sounds are shown on right. Any sound you choose will offer these same options.
2. Change Assignment
After you have entered SYSTEM MODE and have selected Speaker Assignment using
the appropriate select button, the Display will show the seven PIANO and ORGAN
sounds. Press the PIANO 1 select button. The Internal box will be highlighted to
indicate that the LH-1’s Internal Speaker System is now active for this sound. Press
the All Speakers function button to change this assignment. Once All Speakers is
selected, the LH-1 will send sound to both the Internal Speakers and the External
Outputs (where optional External Powered Speakers can be connected).
Now, press the BACK button three (3) times. With the third press, a window will open
that says “Saving the Data Please Wait !” Once this statement disappears, the change
will have been made in the LH-1’s computer memory. The PIANO 1 sound will then be
heard through the Internal Speakers and any optional External Powered Speakers that
are connected to the Line Out jacks.
If you re-enter the SYSTEM MODE to check the Speaker Assignment, you should see
that the All Speakers box is highlighted for PIANO 1. To return to the original setting,
select Internal and press the BACK button three (3) times to save the new setting and
exit.
You can use this process to select a separate Speaker Assignment for each of the
LH-1’s seven sounds.
Internal