Filter
Top Products
12
1.2 HEADPHONE JACK
The headphone jack is located in front at the left end of the key slip. Use a headphone
with a standard stereo 1/4 inch phone jack.
1.3 REAR PANEL
1. POWER SWITCH
Turns the MP5 ON or OFF.
2. POWER RECEPTACLE
Connect the power cable, which is included in the MP5 package, to this receptacle.
3. MIDI JACKS
These jacks are used to connect the MP5 with external MIDI devices such as a MIDI
sound module or a MIDI sequencer.
4. USB JACK
This jack is used to connect the MP5 with a personal computer. See page60 for details.
5. FOOT CONTROLLERS
EXP JACK
An expression pedal can be connected to this jack.
The expression pedal can be assigned to different MIDI control numbers or functions in
the Menu.
DAMPER JACK
This jack is used to connect the Foot Pedal included with the MP5 (KAWAI F-10H).
6. FOOT SWITCH
A momentary footswitch can be connected to this jack (EX: KAWAI F-1 or F-20). The
FootSwitch can be assigned to different MIDI control numbers or functions in the Menu.
When using the KAWAI F-20. The right pedal works as a Foot Switch, and the left pedal
works as a Soft pedal. When the Rotary EFX is in use, the Soft pedal changes between
Fast & Slow Rotor speeds.
7
. OUTPUTS
R, L/MONO OUTPUTS
The R, L/MONO outputs are used to connect the MP5 to a musical instrument amplifier
using standard 1/4 inch phone jacks. The R, L/MONO outputs can also be used to
connect the MP5 to a PA system or recording console.