Filter
Top Products
TK-260G/270G
16
DISASSEMBLY FOR REPAIR
Separating the case assembly from the chassis.
1. Remove the two knobs
z
and three round units
x
.
2. Remove the two screws
c
.
3. Expand the right and left sides of the bottom of the case
assembly, lift the chassis, and remove it from the case
assembly
v
.
4. Taking cure not to cut the speaker lead
b
, open the chassis
and case assembly, and pull the speaker lead with
connector
n
.
Separating the chassis from the unit.
• TK-260G
1. Remove the twelve small screws
m
, and the three large
screws
,
.
2. Remove the solder from the antenna terminal using a
soldering iron, then lift the unit off (X57).
• TK-270G
1. Remove the three screws
.
.
Lift the unit (X54), and rise up the connecter lever in the
arrow with your finger
/
.
Remove the three hexagonal bosses
-
, and remove the
twelve screws
m
.
2.
Remove the solder from the antenna terminal using a
soldering iron, then lift the unit off (X57).
stopper
❷
❹
❸
❶
❸
❷
❶
❷
❶
❷
CN3
b
n
TK-270G
Antenna teminal
X54-
X57-
X57-
❾
❿
➐
❽
❾
❾
❽
❽
➐
➐
➐
➐
➐
➐
➐
➐
➐
➐
➐
Ω
Ω
Ω
11