Filter
Top Products
Your total light and display sensing solution.
SAFETY PRECAUTIONS
Always connect the instrument to the specified
power supply voltage. Improper connection may
cause a fire or electric shock.
For correct use and for your safety, be sure to read
the instruction manual before using the instrument.
Certificate No : JQA-E-80027
Registration Date : March 12, 1997
Certificate No : LRQ 09600941A
Registration Date : March 3, 1995
In the interest of the continuous development and improvement of our products, we reserve
all rights to make technical changes to the information contained in our printed material.
Such changes, errata and printing mistakes do not constitute grounds for claims for
damages. The LumiCam series of measurement cameras may only be used for luminance
and chromaticity measurements of self-illuminating objects.
Technical Specifications
Model UV - VIS VIS - NIR
Spectral range 250 – 830 nm 380 – 950 nm
Spectral resolution 2.7 nm 2.7 nm
Wavelength accuracy *1
+
0.5 nm
+
0.5 nm
Stray light (broadband with standard illuminant A) *2 2·10E-3 at 400 nm 2·10E-3 at 400 nm
General
Detector CCD line sensor
Number of pixels 2048
Integration time 4 msec – 20 sec
Linearity
+
2.5 %
Spectroradiometry
Sensitivity range for irradiance *3 1 μW/m² nm – 0.15 W/m² nm
Signal sensitivity at 1 s integration time *3 20 μW/m² nm
Spectroradiometric accuracy *4
+
7 %
Spectrophotometry
Baseline noise *5
+
0.5 %
Photometric transmission accuracy *6
+
1 %
Baseline drift *6 0.5 %/h
Miscellaneous
Interface USB
AD converter 15 Bit
Dimensions (H, W, D) 145 mm x 90 mm x 185 mm
Power consumption approx. 650 mW (via USB interface)
Ambient conditions 10 – 35° C; relative humidity 70%
Weight approx. 2.1 kg
Instrument Systems constantly endeavors to develop products further. Any technical changes, errors, or misprints do not constitute grounds for claims to compensation. Our General
Terms and Conditions apply in all other respects.
*1 Applies to penray lamp or laser
*2 Measured with 455 nm cut filter
*3 Measured with EOP120 and OFG424 fiber bundle at 500 nm wavelength, a signal-to-noise ratio of 10:1 and without averaging
*4 Directly after calibration relative to the calibration standard
*5 For the shortest integration time, a sufficient signal level and averaging of 10; noise is reduced further at higher averaging
*6 Applies to LS100-130 light source after 1 hour of warming up and averaging of 10