Korg D12 Musical Instrument User Manual


 
107
P3 InsEff2: Selection and settings
for Insert Effect 2
Select insert effect 2 and make settings for it.
For details refer to “P2 InsEff1: Selection and settings
for Insert Effect 1.”
P4 InsEff3: Selection and settings
for Insert Effect 3
Select insert effect 3 and make settings for it.
This will appear only if you have selected “1in1outx4
or “1in1outx8” for “SelectEffType” in the “InsAss” tab
page (p.105).
For details refer to “P2 InsEff1: Selection and settings
for Insert Effect 1.”
P5 InsEff4: Selection and settings
for Insert Effect 4
Select insert effect 4 and make settings for it.
This will appear only if you have selected “1in1outx4
or “1in1outx8” for “SelectEffType” in the “InsAss” tab
page (p.105).
For details refer to “P2 InsEff1: Selection and settings
for Insert Effect 1.”
P6 Ins58: Selection and settings
for Insert Effects 58
Select insert effects 5–8 and make settings for them.
This will appear only if you have selected “1in1outx8
for “SelectEffType” in the “InsAss” tab page (p.105).
For insert effects 5–8, use “SelectEffect5…8” to select an
effect and edit it.
7. SelectEffect58....................... [Eff5, Eff6, Eff7, Eff8]
Of insert effects 5–8, select the effect that will be dis-
played in this page. Editing, bypass, and rename
operations will affect the effect that is displayed.
For other details refer to “P2 InsEff1: Selection and
settings for Insert Effect 1.”
The master effects are used by sending an adjustable
send amount from each channel to the effect. They can
be used to adjust the overall depth and balance. The
D12 provides two master effects.
The final effect is used to adjust the final stage of the
master LR bus. The D12 provides one stereo final effect.
The AUX send is used when you wish to apply an
external effect to the sound.
P1 MstEff1: Selection and settings
for master effect 1
1. OutputLevelMeter....................................................
(OUT L, R/CLP, 6, 12, 18, 40 dB)
This indicates the output level of the effect.
The horizontal axis indicates the effect output, and
the vertical axis indicates the level.
The send amount from each channel (i.e., the level
that is input to the effect) is adjusted in the
“EffSnd1” tab page.
2. EffectNumber........[M000, M001032, u001032]
Select the effect program.
u001”–“u032” is the user area, where effect pro-
grams that you edit can be stored.
3. EffectProgramName...................(Effect Program List)
When you press this button, the “Effect Algorithm”
dialog box will appear. Here you can view the struc-
ture of the program, and check the on/off status.
3a. EffectIcon..........................................................
3b. Effect On/Off....................................... [On, Off]
Refer to “EffectIcon” and “Effect On/Off” for insert
effects (p.106).
4. RetLev....................................................[000100]
Adjust the return level from the master effect to the
master bus.
Higher settings will cause the effect to apply more
deeply.
1
2
6
3
5
4
7
20. MASTER EFFECT/AUX/
FINAL EFFECT
1
6
7
8
42 5 3
3b
3a
Refer
e
INS EFFMAST EFF