Filter
Top Products
14
Use the rear panel [LCD CONTRAST] knob to adjust
the contrast. (→p.11)
1. Selecting a mode
To make settings in the LCD screen for the various
functions of the D12, you must first press the key of the
mode that includes that function.
For the functions of each mode, refer to “Reference”
(→p.75–).
2. Selecting a tab page
Each mode contains numerous parameters, and these
are organized into pages. Pages are accessed by tabs.
1 Press the key for the desired mode.
The illustration below shows a page of TEMPO/
RHYTHM mode that will appear when you press
the [TEMPO/RHYTHM] key.
2 Select the desired tab page.
Each time you press the key of the currently
selected mode, you will cycle through the tab
pages of that mode.
Some pages contain only one tab.
3. Selecting and setting a parameter
Selecting a parameter
To edit a parameter, use the [CURSOR] key to move the
edit cell to the parameter that you wish to edit, high-
lighting that parameter.
In a list display screen, you can rotate the [VALUE] dial
to move the edit cell.
Setting a parameter value
The method of setting a parameter value will differ
depending on the type of parameter.
● Underlined “___” parameters, and icons such as
EQ
Use the [CURSOR] key to move the edit cell to the
parameter, highlighting it, and rotate the [VALUE]
dial to set the value.
This is the usual type, and includes underlined
parameters such as “T
empo,” parameters repre-
sented by an icon such as EQ, and also Locate times
to be adjusted.
● Popup buttons and dialog boxes
Use the popup button to access the dialog box, and
set the parameter value (→p.13).
• Use the [CURSOR] key to move the edit cell to
the popup button, and press the [ENTER] key to
access the dialog box.
● Toggle buttons
These buttons are used to turn a function on/off.
(→p.13)
• Use the [CURSOR] key to select the parameter,
and press the [ENTER] key. The button will turn
on/off each time you press it.
● Radio buttons
These buttons are used to select one of multiple
choices.
• Use the [CURSOR] key to move the edit cell to
the desired button, and press the [ENTER] key.
● Selecting an item from a list
• To select a song or mark, rotate the [VALUE]
dial to select the desired item.
• To select a song in a program play list, use the
following procedure.
1 Select the playback list num.
2 Rotate the [VALUE] dial to select the song.
Adjusting the LCD screen con-
trast
Basic operation