Filter
Top Products
8
Objects in the LCD screen and their
functions
The LCD screen of the D16 features a TouchView sys-
tem that uses a touch panel.
By pressing objects that appear in the LCD screen, you
can select pages, set parameter values, move the cursor,
modify settings, and perform other operations.
In this owner’s manual for the D16, words
enclosed in “double quotation marks” such as
“…
”, “…” button, or “…” tab refer to items shown
in the LCD screen. Words enclosed in [square
brackets] such as […] key, […] knob, […] dial, or
[…] fader refer to controls on the top panel, front
panel, or rear panel.
a: Current parameter display
This is the name of the currently selected parameter.
For icon-type parameters such as EQ and faders, the
value is shown at the right.
b: Edit cell
When you press an editable parameter on the LCD
screen, the parameter or parameter value will be high-
lighted. This is referred to as the edit cell, and your
editing will affect the highlighted portion.
To modify the parameter value in the edit cell, you can
use either the [VALUE] dial (→p.9) or the popup but-
tons in the LCD screen.
c: Popup button
When you press this button, the available parameter
values will be displayed in a dialog box (f:).
To input the value of a parameter, press the desired
value in the dialog box.
d: Toggle button
This type of button switches a function or setting on/
off each time it is pressed.
e: Tab
Press a tab to select the desired page.
Alternatively, you can cycle through the available tabs
by repeatedly pressing the mode key for the currently
selected page.
f: Dialog box
To execute, press the “OK” button. To cancel without
executing, press the “Cancel” button. The dialog box
will close.
g: Radio buttons
These type of buttons are used to select one of multiple
choices.
h: Icon
To modify the parameter value of an object shaped like
a slider or knob, press it to make it the edit cell, and
rotate the [VALUE] dial to adjust the value.
i: Scroll buttons
Use these buttons to view parameter values that cannot
be shown in a single screen.
Use the rear panel [LCD CONTRAST] knob to adjust
the contrast. (→p.7)
Objects in the LCD screen
e: Tab
a:Current parameter
display
c:Popup
button
d:Toggle
button
b: Edit cell
,
,
(On)/
(On)/
(Off),
(Off)
Adjusting the contrast of the
LCD screen