Korg D16 Musical Instrument User Manual


 
10
Undo
After recording or editing a track, you can execute
Undo to return to the state before the data was
recorded or edited.
You can undo up to 99 previous operations. You can
also use Redo to return the data to the state in which it
was before you performed Undo.
As an example, suppose that you have been using loop
recording, and would like to select the best take. For
details on loop recording, refer to p.72.
1 Press the [UNDO] key.
The list will show the latest recording and previous
recordings.
2 Rotate the [VALUE] dial to select what you con-
sider the best take from the list.
3 Press the “Undo” button to execute Undo.
The specified take will be selected.
4 Playback to verify that you selected the correct
take.
If you press the [PLAY] key when “AutoPunch” is
turned “On” (in the [AutoPunch] “AtPunch” tab
page), playback will loop between the record start
(IN) time and the record end (OUT) time.
5 Press the “Redo” button, and you will return to
the “Level00” take.
For details on Undo, refer to p.73.