Filter
Top Products
30
1in1outx4 (mono-in/mono-out × 4)
• While recording four vocals simultaneously, you
could apply Exciter-Comp to voices that lack
impact, and apply Limiter-P4EQ to loud voices as
you record.
Other examples are shown below.
1in1outx8 (mono-in/mono-out × 8)
• When you have set up eight mics to simultaneously
record each instrument of a drum set, you could
apply separate effect programs to each; e.g., Limiter
on the bass drum, Gate on the snare and cymbal,
and Exciter on the toms.
• When you have set up eight mics to simultaneously
record multiple instruments, you could apply Gate
to each sound to reduce leakage between the mics,
or apply Limiter to adjust the dynamics.
During track playback
2in2outx2 (stereo-in/stereo-out × 2)
• Two tracks containing stereo recorded drums etc.
could be processed by St.Comp or St.Limiter to
adjust the dynamics, or Reverb could be applied to
create a broader sense of space.
1in1outx4 (mono-in/mono-out × 4)
• Exciter-Comp or Limiter-P4EQ could be applied to
individual recorded tracks to adjust the dynamics,
or P4EQ-Cho/Fln could be applied to add modula-
tion.
1in1outx8 (mono-in/mono-out × 8)
• Comp, Limiter, Gate, or Expander could be applied
to individual recorded tracks to adjust the dynamics,
or Chorus, Phaser, or Delay could be applied.
Applying the insert effects while you
record (analog/rhythm only)
While you record, effects can be applied to the input
from an instrument connected to the [INPUT 1/
GUTAR IN] – [INPUT 8] analog inputs, or to the built-
in rhythm sound that is input to a mixer channel, so
that the sound processed by the effect is recorded.
As an example, here’s how you can connect a guitar to
the [GUITAR IN] jack, apply effects, and record the
result on track 1.
1 Connect the guitar, and select the track for record-
ing.
Refer to “Assign the guitar input from [GUITAR
IN] to mixer channel 1” (→p.16).
2 Select the [INSERT EFFECT] “InsAss” tab page.
3 Press the “Assign: ” button to select “Input
(In).”
4 Press the “SelectEffType: ” button to select the
effect type.
The screen shown here is for when “1in1outx4” is
selected.
5 Insert the effect between INPUT 1 (GUITAR IN)
and channel 1.
• Press the “Insert To: ” button.
• For effect 1, use “SelectInput
” to set the input to
“In 1,” and use “SelectCh
” to set the channel to
“1.”
• Press the “OK” button to apply the settings.
6 Select the effect program.
• Select the [INSERT EFFECT] “InsEff1” tab page.
• Press “Ef
fectNumber,” and rotate the [VALUE]
dial to select an effect program.
SelectInput
input selection
SelectCh
channel selection
Effect 1