Filter
Top Products
33
• Use the “Effect On/Off” button located at the
top of the dialog box to switch the effect on/off,
so that you can hear the result of the effect. This
on/off setting is linked with the “(Effect On/
Off)” button of step 5. Changing one setting
will change the other as well.
• When you are finished making adjustments,
press the “OK” button.
(If you wish to adjust other effects, press the
“(EffectIcon)” button, and adjust the parame-
ters.)
• In the “EffectAlgorithm” dialog box, press the
“OK” button.
7 Assign a name to the effect program that you
edited.
• Press the “Rename” button to access the
“RenameEffect” dialog box. For the rename pro-
cedure, refer to “2. Naming a song” (→p.14).
• After you have assigned a name, press the “OK”
button.
8 Store the effect program.
• If the D16 is playing, press the [STOP] key to
stop playback.
• Playback “Store” button to access the “StoreEf-
fect” dialog box.
• Specify the number for storing, and press the
“Exec.” button to store the data.
Be aware that when you store, the data will be
overwritten onto that number, and any data previ-
ously stored in that number will be lost.
You can use an expression pedal or MIDI controller to
control an insert effect in realtime.
For the effect parameters that can be controlled, refer to
p.89–102.
1 Connect an expression pedal or external MIDI
controller. (→p.11)
2 Select the external device that will control the
effect.
• Select the [SYSTEM] “Control” tab page.
• In “Device (CtrlChgDevice
),” select “Pedal” if
you wish to use an expression pedal, or select a
MIDI message if you wish to control via MIDI.
(→p.45)
• When setting “Device (CtrlChgDevice
)” to a
MIDI message other than “Pedal” for control,
set the [SYSTEM] “MIDI” tab page “GlobalCh
(GlobalChannel)” setting to match the MIDI
channel of the external MIDI device that is
transmitting the control messages.
3 Select the insert effect that you wish to control.
Use “Ass(#) (CtrlChgAssign
)” to select the insert
effect that will be controlled.
4 Select the effect program that you wish to control.
• In the [INSERT EFFECT] “InsEff1”–“InsEff5–8”
tab pages, choose the insert effect that you
selected in step 3.
• Press “Ef
fectNumber,” and rotate the [VALUE]
dial to select the effect program.
If the selected effect includes a control function,
and the conditions allow the effect to be con-
trolled, a “#” symbol will be added at the end of
the effect program name.
5 Specify the parameter to be controlled, and the
range of control.
• Press the “(Effect Program Name)” button.
The “Effect Algorithm” dialog box that makes
up that effect program will appear.
Controlling an effect from an
external device
Basic operation
Using effects