Filter
Top Products
52
16Tr→2Tr: Select this when recording 16 tracks of
playback onto two tracks or one track.
The track playback will be valid for the channel(s)
whose [TRACK STATUS] key is set to REC (LED lit
red), and will be recorded together with the other
playback tracks.
Be aware that if rhythm is “On” during bounce
recording, the rhythm will also be recorded
together with the other sounds.
2. RecordVirtualTrack....................[Current, a…h]
Select the recording destination virtual track.
Select the virtual track of the recording track
selected by the [TRACK STATUS] key on which
bounce recording will occur.
Current: The currently selected track
a…h: The specified virtual track
By selecting “Current” or any other virtual track
“a”–“h,” you can do things like combine sixteen
tracks to two virtual tracks without erasing any of
them. However if the track selected for recording is
the same as the currently selected virtual track, con-
ventional bounce recording will occur.
To avoid accidentally recording over a previously
recorded track, use [TRACK] “Vtr1–8” and “Vrt9–
16” tab pages to check which virtual tracks are
“Current” and which contain recorded data before
you make your selection.
P1 Vtr1–8:
Select virtual tracks 1–8
1. Select VirtualTrack........... [1a…1h, …, 8a…8h]
Select the virtual track for each track “1”–”8.” Each
track has eight virtual tracks: “a”–”h.” One of these
virtual tracks can be selected for recording/play-
back.
2. SelectAll.............................................[On, Off]
Turn this “On” if you wish to use the same virtual
track number for all tracks (1–16). Then choose any
“Select V
irtualTrack” to choose the track.
On: All tracks will be set to the same vir-
tual track number.
Off: The virtual track number can be
selected independently for each track.
P2 Vtr9–16: Select virtual tracks
9–16
For details refer to “Vtr1–8.”
This page cannot be selected for a 24 bit song.
1. Select VirtualTrack...........................................
[9–10a…9–10h, …, 15–16a…15–16h]
Select the virtual track for each pair of tracks.
2. SelectAll.............................................[On, Off]
4. TRACK
2
1
Selected track
Recorded track