Filter
Top Products
59
P1 SelSong: Selecting a song
1. SongNumber ........................[I…G/001…100]
Select the song.
The display shows the drive, song number, and
song name.
If 24 bit recording is selected, the display will indi-
cate “ .” If the song is protected, the display will
indicate “ ” (→p.60).
Press the “ ” button, and you will be able to select
from a list. To select a different drive, select
“Drive” from this list.
You can also select songs by holding down the
[STOP] key and pressing the [FF] key or [REW] key.
1a. Drive ............................................... [I…G]
Select the drive.
For details on the drive numbers, refer to “Drive
ID” (→p.47).
2. Select DispParameter.......[Tempo, Mark, Scene]
Select whether the LCD display will show the cur-
rent tempo, mark, or scene settings.
Press the “ ” button, and you will be able to select
from a list.
Tempo: The display will show the tempo source,
tempo, time signature, and rhythm of the song.
Mark: The display will show the number and name
of the mark at or immediately before the current
location in the song.
Scene: The display will show the number and name
of the scene for the current location in the song.
3. Rename..........................................................
Press the “Rename” button to access the dialog box,
and modify the song name. You can input a song
name of up to sixteen characters. (→p.14)
4. New...............................................................
This creates a new song following the last song of
the currently selected drive.
Press the “New” button to access the dialog box.
Set “SongType” and “MixerSet,” and press the
“OK” button to create the new song. If you press
the “Cancel” button, no song will be created.
4a. SongType..................................................
[16Bit/16Track, 24Bit/8Track]
16Bit/16Track: Create a song for 16 bit recording/
playback. Tracks 1–16 can be used. A maximum of
eight tracks can be recorded simultaneously.
24Bit/8Track: Create a song for 24 bit recording/
playback. Eight tracks (1–8) can be used. Tracks 9–
16 are not available. A maximum of four tracks can
be recorded simultaneously.
When audio data is transferred to a 16 bit song
(“CopyTrk”: →p.56), it will be handled as 16 bit
data.
The “SongType” (Bit/Track) setting can be changed
only when creating a new song.
4b. MixerSet.......................... [New, PrevSong]
Select the mixer settings for the new song.
New: New settings will be used.
PrevSong: The mixer settings of the currently
selected song will be used.
P2 EditSong: Song editing
The song affected by editing will normally be the
currently selected song. (However the “Copy-
AllSong” operation will affect all songs.)
Undo is not available after these operations.
5. SONG
13
4
2
1
1a
4b4a
1
5
2 3
4
Reference
TRACKSONG