Kustom KXB200 Musical Instrument Amplifier User Manual


 
Kustom
®
KXB200 Specications
Output Power
200 Watts 4 Ohms at 5% THD+N
Speaker
1 X 15”
Custom Designed
4 Ohms
Horn Type
Piezo Horn with On/Off Switch
Input Impedance
Dual Input 0 dB: 500K ohm, -6dB: 95K ohm
Gain
75 dB Gain and Master at Max, All EQ at 12 o’clock
S/N Ratio
-80 dB typical Below rated power
DIrect Output
Electronically Balanced
XLR
Ground Lift Switch and Level control
Aux Input
800 mV Sensitivity Stereo 3.5mm High Impedance
Headphone Output
15 mW @ 30 ohms
per channel
Stereo 3.5mm, 8 ohm minimum
Effects Loop
800 mV/1K Ohm output
impedance
Effects Send, Gain and Master at 12
o’clock
800 mV/22K Ohm output
impedance
Effects Return, Gain and Master at 12
o’clock
Amplier Tone Controls
63 Hz +/- 12 dB
150 Hz +/- 12 dB
350 Hz +/- 12 dB
800 Hz +/- 12 dB
2 KHz +/- 12 dB
5 KHz +/- 12 dB
Power Requirements
USA/Canada 120VAC/60Hz, 300W
Europe 230VAC/50Hz, 300W
UK 240VAC/50Hz, 300W
Australia 240VAC/50Hz, 300W
Japan 100VAC/50-60Hz, 300W
Dimensions/Weight
Combo
cm
3
/Kilogram 62.9 (Height) X 50.8 (Width) X 38.1 (Depth),
30.4 Kilogram
Inches/Pounds 24.75 (Height) X 20.0 (Width) X 15.0 (Depth),
67 Lbs
kustom.com