Filter
Top Products
15
Information
Troubleshooting
Troubleshooting
My microphone doesn’t work.
Check to make sure your LT-700 transmitter is turned on and that the batteries are charged.
Make sure your microphone cable is plugged firmly into the microphone jack on the LT-700.
Make sure the LT-700’s MUTE switch is in the correct position. LA-274: make sure the
microphone’s ON/OFF switch is in the correct position.
My microphone audio sounds distorted or “fuzzy”.
Make sure the Mic Sensitivity Switch (inside cover of LT-700) is set to the correct position for your
microphone. Make sure you are speaking in a normal voice. If you speak too loudly, your audio
will be distorted.
My microphone works, but the audio is very low.
Make sure the microphone is connected firmly in the LT-700 Transmitter.
Make sure the microphone is positioned so the mic element points directly at your mouth. Refer
to individual microphone page to confirm correct orientation.Make sure the Mic Sensitivity
Switch (inside front cover of the LT-700) is in the correct position for your microphone. See page
5 to verify correct setting for your microphone.
Transmission seems to stop or audio cuts out.
Make sure the microphone is firmly plugged into to the LT-700.
Make sure the batteries in the LT-700 are fully charged.