Logic Soundlab VS-20 Recording Equipment User Manual


 
9
VS-20 Control Surface Plug-in for Logic and GarageBand
Troubleshooting
Can’t control the intended track
Is the track you want to control included in the current track group?
If not, use the track group select buttons to move to the track group, and include the desired track in that track group.
Can’t select multiple tracks
Only one track can be selected on the VS-20 itself; multiple tracks cannot be selected simultaneously.
If you want to select multiple tracks, hold down the SHIFT key on your Mac keyboard and use the mouse to click each of the desired tracks.
Track group indicator goes out when you select the last track group
A track group is a group containing eight tracks.
If the total number of tracks in your project is not a multiple of eight (e.g., 8, 16, 24, ...), all of the track group indicators will go out when you move to
a track group that includes track 33 or later. Since the number of tracks in the last track group is less than eight, it cannot be counted as a track group,
and the track group indicators will go out.
Even if the track group indicators are extinguished, you’ll still be able to operate the controllers without any problem.
The track group changed farther than you expected (Logic Pro or Logic Express)
Could the [Signal Flow Channel Strip] box be unchecked?
In the Mixer window view menu, select the [Add a Signal Flow Channel Strip] item so that the track group will indicate the track that is actually
selected.
MEMO
The channel strip located at the top of the Environment window can be controlled by displaying it in the Mixer window. For details on the
Environment window, refer to the Logic Pro/Express documentation.
No control obtained by pressing the VS-20’s buttons (Logic Pro or Logic Express)
The control surface settings may have been changed.
Open the control surface setup dialog box by choosing Preferences | Control Surfaces | Setup, and then click the VS-20 icon. In the items shown in the
upper left of the dialog box, make sure that the “Out Port” and “Input” are both set to “VS-20 DAW Co” (VS-20 DAW Control.)
* Apple, GarageBand, Leopard, Logic, Mac OS X and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
Copyright © 2010 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
1PS