Filter
Top Products
DX810
Digital Audio Mixer/Signal Processor
Instruction Manual Addendum
For v3.2
Remote Mapping
DX-810 Version 3.2 software adds the capability of
mapping individual buttons on the DX-SW4 remote
control. This means that each button can be
assigned a different function, rather than being
limited to four sequential selections of the same
function (addresses 0 to 40).
New remote addresses (from 41 to 56) have been
added to implement this feature. (See the table on
the reverse side for these address settings).
This feature can be accessed both in the Button
Section
and in the Windows drop-down menu of the DX-810
V3.2 software.
Clicking either of these options opens the Remote
Mapping window:
Four buttons along the top of this window allow
selecting 16 DX-SW4 remotes in groups of four.
The four selected remotes (addresses 41-44, 45-48,
49-52, and 53-56) appear in the Remote Mapping
window. Drop-down menus for each of the four
buttons on the remote are provided for selecting
the Function and the Affected I/O. The following
chart indicates the Function and Affected I/O
selections available:
Function Affected I/O
Force On Inputs 1-8
Force Off Inputs 1-8
Mute/Enable Input Inputs 1-8
Mute/Enable Output Outputs A-J
Mute/Enable Group Groups 1-32
Preset Recall Presets 1-24
Combine Combine 1-16