Mackie DX810 Music Mixer User Manual


  Open as PDF
of 2
 
R20
R21
R22
R23
R24
R25
R26
R27
C14
C7
R35
R1
R2
R3
C3
C4
C16
R34
R4
D3
D4
C9
U5
U2
C8
U6
J2
L2 L1
J4
S1
D2
J5
J3
R6
R7
C10
R5
GND
A
B
PWR
1
ON
FUNCTION
2345678
With the DIP switches on the DX-SW4 set for the appropriate address (41 through 56), it is now possible to
assign any of these listed functions to any of the four DX-SW-4 selection buttons.
DX-SW4 Remote Switch Control (4-button/4-LED)
for DX-810 v3.2 (Firmware v7.04)
Switch Positions*
ID 1 through 8 Function
41 10010100 Assignable in Remote Mapping Window
42 01010100 Assignable in Remote Mapping Window
43 11010100 Assignable in Remote Mapping Window
44 00110100 Assignable in Remote Mapping Window
45 10110100 Assignable in Remote Mapping Window
46 01110100 Assignable in Remote Mapping Window
47 11110100 Assignable in Remote Mapping Window
48 00001100 Assignable in Remote Mapping Window
49 10001100 Assignable in Remote Mapping Window
50 01001100 Assignable in Remote Mapping Window
51 11001100 Assignable in Remote Mapping Window
52 00101100 Assignable in Remote Mapping Window
53 10101100 Assignable in Remote Mapping Window
54 01101100 Assignable in Remote Mapping Window
55 11101100 Assignable in Remote Mapping Window
56 00011100 Assignable in Remote Mapping Window
*Switch Positions: 1=ON; 0=OFF
In addition to the preset functions (addresses 0 to 40),
the following DX-SW4 DIP switch settings are available:
DIP Switches
Part No. 0005655 Rev. A 03/03
© 2003 Mackie Designs Inc. All rights reserved.
Printed in the U.S.A.
 previous