Filter
Top Products
54
ENGLISH
In Blues Mode all controls are operational and the
Bluesbreaker II will give your guitar a wonderfully creamy,
natural sounding bluesy overdrive. This mode is great when
using a clean amp but can also be used with an amp that is
already distorting for extra Marshall mayhem.
3. Drive
This increases the amount of distortion, taking you from
vintage breakup, ideal for big crunchy chords and sweet
singing blues, to full on overdrive.
N.B. This control is only operational when on Blues mode.
4. DC Input
For input of a 9V DC adaptor should you not wish to use
batteries.
5. LED
Indicates when the Bluesbreaker II is in operation.
6. Tone
The Bluesbreaker II features pre-set bass and mid controls, for
optimum response. This Tone control effects the treble region
of your tone adding brightness and cut.
N.B. This control is only operational when on Blues mode.
7. Volume
Controls the volume of the pedal.
When in Boost mode this governs the level of the signal
driving into the amplifier. The more the level is increased the
more you will push the amp into distortion.
When in Blues mode this control allows you to set a different
volume level for solos etc.
8. In Jack Socket
This is the input jack, for connection to your guitar or to
another effects pedal if you are linking pedals together.
9. Foot Switch
For switching the Bluesbreaker II on and off.
WHAT IF
NO
OUTPUT
SOUND TOO
TREBLY OR
FIZZY
UNUSUAL
HUM
BASS
FEEDBACK
SOUND TOO
MUSHY OR
BASSY
UNUSUAL
FEEDBACK
INDICATOR
LED NOT
ON
NOISE IN
BYPASS
CHECK
BATTERY
CHECK
LEADS
CHECK PEDAL
CONTROLS
DC INLET
CHECK AMP
CONTROLS
CHECK GUITAR
REDUCE
TREBLE
REDUCE
TREBLE
INPUT
LEAD
Trouble Shooting
✓✓
✓
✓
✓
✓
✓
✓✓✓✓
✓
✓✓✓
✓
✓
✓✓
✓✓✓
MOVE A
W
AY
FROM AMP
PICKUPS
MAY BE
VIBRATING