Filter
Top Products
Technical Specification
Power: 9V DC Centre Negative Regulated
Minimum Current Draw: 80mA
Controls: Mode, Delay Time, Feedback, Level
Switches: On/Off Switch
Indicators: On/Off LED
Jacks: 2 Input, 2 Output 'Jack sockets'
Input Impedance: 1MΩ
Output Load Impedance: < 1kΩ
Dimensions: 120mm x 65mm x 55mm
Weight: 510 grammes
76
ENGLISH
Battery Replacement
1. To replace the battery, open the easily accessed coin screw
battery cover plate by loosening screw as shown, then
disconnect the battery connector lead.
2. Use PP3 or equivalent battery
(for improved battery life use
alkaline type).
3. Always ensure that the battery
is removed when the pedal is
not in use for long periods.
4. Dispose of old battery in a
safe place.
WHAT IF
NO
OUTPUT
SOUND TOO
TREBLY OR
FIZZY
UNUSUAL
HUM
BASS
FEEDBACK
SOUND TOO
MUSHY OR
BASSY
UNUSUAL
FEEDBACK
INDICATOR
LED NOT
ON
NOISE IN
BYPASS
CHECK
BATTERY
CHECK
LEADS
CHECK PEDAL
CONTROLS
DC INLET
CHECK AMP
CONTROLS
CHECK GUITAR
REDUCE
TREBLE
REDUCE
TREBLE
INPUT
LEAD
Trouble Shooting
✓✓
✓
✓
✓
✓
✓
✓✓✓✓
✓
✓✓✓
✓
✓
✓✓
✓✓✓
MOVE A
W
AY
FROM AMP
PICKUPS
MAY BE
VIBRATING