Filter
Top Products
6
Installing Drivers for Windows 2000
1. Power up your PC.
2. Insert the Keystation Pro 88 Installer CD-ROM into the CD drive of your PC. The installer should open automatically. If not,
select “Run” from the Start Menu, type “d:\setup.exe” (where “d” is your CD-ROM drive), and then press ENTER.
3. Click on “Drivers Installer.”
4. Follow the onscreen instructions.
5. When finished, exit the setup.
6. Switch on the Keystation Pro 88 (18). Windows will automatically recognize the keyboard and ask for the Keystation Pro 88
Installer CD-ROM.
7. Select the CD-ROM drive and click “OK.” Windows will then ask you to select the CD-ROM drive again for the MIDI driver.
8. If Windows reports the drivers have not been digitally signed, click on “Continue Installation.”
9. Select the drive once more.
10. Click “OK.” You have competed installation of the unit.
Installing Drivers for Apple Mac OS 9.x
If you do not have OMS installed on your computer, please run the OMS installer first, as explained below. If OMS is already installed
on your computer then please continue on to the driver installation instructions, “Installing the Keystation Pro 88 OMS Driver.”
To install OMS:
Make sure that all programs are shut down before you begin the installation. Also, make sure you have removed any dongles (copy
protection devices).
1. Insert the Drivers Installer CD-ROM.
2. Double click on the Keystation Pro 88 Installer CD icon on your desktop
3. Double click on the OS 9 folder.
4. Double click on “Install OMS 2.3.8.”
5. Follow the onscreen instructions.
6. OMS will now take a few moments to install. When it has finished, it will ask you to restart the computer. Click “Restart.”
Installing the Keystation Pro 88 OMS Driver
1. Click and drag the USB Drivers Installer to the desktop from the OS 9 window it currently resides in.
2. Double click on the icon. If a window appears, click “Open”.
3. Double click on the newly created USB Drivers Installer on your desktop.
4. Click “Install.” The installer automatically places the drivers in the correct system folders.
6. Once the installer has finished installing the drivers, click “Restart.”
7. Switch on the Keystation Pro 88 (18).
OMS Setup
You now have to run the OMS Setup program:
1. Before beginning the setup, ensure that AppleTalk is off. (This option is found in the chooser.)
2. Open the Hard Drive, then the “Opcode” folder, the “OMS Applications folder,” and then “OMS Setup.”
3. OMS will inform you that it has not yet been configured. Click “OK.”
4. The “Create A New Studio Setup” dialog box now appears. Click “OK.”
5. The “OMS Driver Search” box asks you to choose the port to which you have attached the Keystation Pro 88 (either Modem
or Printer). DO NOT choose a port; simply click “Search,” and OMS will begin searching.
IMPORTANT: If the USB cable is not correctly hooked up to the keyboard, setup will fail.
6. “OMS Driver Setup” shows the Keystation Pro 88 in a list when OMS successfully finds the driver. Click “OK.” OMS will now
define (shows “Identifying”) the Keystation Pro 88 output port.
7. The “OMS MIDI Device Setup” dialog box will appear showing the Keystation Pro 88’s output port with an open check box to
the left of the port. Click on the open box to enable the output port and click on “OK.”
8. Next, the “My Studio Setup” appears with a file save dialog box over it. You must name and save your new Studio Setup (or
use the default name) before you can assign an instrument to the Keystation Pro 88’s output. Assign your instrument (this
step is optional) and you are done.
9. Your Keystation Pro 88 is ready for use.
You can run the OMS Test Studio utility by going to the Studio Menu and releasing the mouse on “Test Studio.” Playing a note on your
keyboard will give you an audio message from your computer, “MIDI received,” while the arrow pointing to the keyboard icon flashes.
Clicking on the keyboard icon with the mouse pointer will send a tone cluster to the Keystation Pro 88’s output port. The LED will light,
and the sound module connected to the Keystation Pro 88’s MIDI Out port should play the chord.
You may now exit OMS Setup by quitting the application. You must complete the configuration process from within your music
software application. This often requires you to select “OMS Compatibility” or “Open Music System” for your MIDI system setup. Also
make sure your Keystation Pro 88 is selected as the MIDI input in your music software.
KSPro88-GS-JEFIGS.qxd 4/8/05 2:41 PM Page 6