Filter
Top Products
Kit Assembly 95-7951
10
Stacked ISO mount units provision
(Figure E)
(Figure F)
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Snap the Double DIN brackets to the
outside edge of the Double DIN trim
plate. (Figure E)
3. Slide the stacked ISO units into the
bracket/trim plate assembly and secure
the units to the assembly using the
screws supplied with the units.
(Figure F)
4. Reassemble dash in reverse order
of disassembly.