MTR-35HS — OPERATION & PARTS MANUAL — REV. #5 (11/09/04) — PAGE 7
RULES FOR SAFE OPERATION
■
NEVER Run engine without air filter. Severe engine may
occur.
■
Always service air cleaner frequently to prevent carburetor
malfunction.
■
Always be sure the operator is familiar with proper safety
precautions and operations techniques before using rammer.
■
Always store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.
■
NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage to
the equipment and/or injury to user may result.
■
NEVER Run engine without air cleaner. Severe engine
damage may occur.
■
Always read, understand, and follow procedures in Operator’s
Manual before attempting to operate equipment.
■
Always be sure the operator is familiar with proper safety
precautions and operations techniques before using pump.
■
Always store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.
■
Refer to the
ROBIN Engine Owner's Manual
for engine
technical questions or information
recommended by Multiquip
for this equipment. Damage to the equipment and/or injury to
user may result.
Transporting
■
Always shutdown engine before transporting.
■
Tighten fuel tank cap securly and close fuel cock to prevent
fuel from spilling.
■
Drain fuel when transporting rammer over long distances or
bad roads.
■
When placing the rammer inside a truck-bed for transport,
always tie-down the rammer.
Emergencies
■
Always know the location of the nearest
fire extinguisher
and
first aid kit
. Know the location of the nearest telephone.
Also know the phone numbers of the nearest
ambulance
,
doctor
and
fire department
. This information will be
invaluable in the case of an emergency.
Maintenance Safety
■
NEVER lubricate components or attempt service on a running
machine.
■
Always allow the machine a proper amount of time to cool
before servicing.
■
Keep the machinery in proper running condition.
■
Fix damage to the machine immediately and always replace
broken parts.
■
Dispose of hazardous waste properly. Examples of potentially
hazardous waste are used motor oil, fuel and fuel filters.
■
DO NOT use plastic containers to dispose of hazardous
waste.