Filter
Top Products
Transducer Type: Back electret condenser element (10mm)
Directional Pattern: Cardioid
Frequency Response: 50Hz~18KHz (-3dB)
Sensitivity (1V/Pa@1KHz): 45dB
Impedance: 250 Ohms, balanced
Maximum SPL: >120dB
Wireless Power Requirements: Bodypack transmitter with phantom
power
Hardwired Power Requirements: 9-52V phantom power to be used
with XM-60 adapter
Power Requirements: 6V (9-52V with XM-60)
(U.S.) Should your Nady microphone require service, please contact the Nady Service Department via phone at (510) 652-2411 or
e-mail at service@nady.com
(INTERNATIONAL) For service, please contact the Nady distributor in your country through the dealer from whom you purchased
this product.
Able to handle high sound pressure levels without distortion, the CM-60 microphone is ideal for close-up miking of all types
of drums and percussion instruments, as well as for accurate sonic reproduction of brass, string, woodwind, guitars, and
other acoustic instruments producing high sound fields. Perfect for hard-wired or wireless applications in live performance
or recording applications.
• Mounts to drum rims, the edge of acoustic guitar sound holes or the bell of wind instruments for accurate sound repro-
duction and isolation from other instruments
• Tight cardioid polar response is highly effective in suppressing feedback and unwanted sounds
• Rubber boom shockmount’s ingenious design minimizes vibration and audio transference from resonant instruments or
materials
• Sturdy rubber-grip spring clamp holds mic securely and prevents marring the finish
• Built-in windscreen, as well as external windscreen included, for maximum feedback and pop rejection
• Adjustable gooseneck and swivel joint allows optimum microphone positioning
• For use with bodypack transmitters or with standard mixers that provide 9-52V phantom power.
FEATURES
FREQUENCY RESPONSE POLAR DIAGRAM
SPECIFICATIONS
SERVICE
• The microphone should never be dropped or subjected to extreme shock. Store only in a padded case to protect it dur-
ing transport.
• Keep the microphone away from extremely high temperatures (above 140 °F or 60 °C) and humidity. Avoid leaving the
microphone in direct sunlight for long periods of time.
• When using the microphone outdoors, avoid getting it wet.
• After use in a high-moisture application such as a stage performance, wipe off the microphone with a dry cloth and per-
mit it to air dry. Do not store the unit in a closed space (e.g., a plastic bag) until all moisture has evaporated.
PRECAUTIONS AND CARE FOR YOUR CM-60
Relative Response in Db
+20
+10
-10
0
0
20Hz 50Hz 100Hz
500Hz
1K 2K 5K
10K 20K
0°
30°
60°
90°
120°
150°
180°
210°
240°
270°
300°
330°
Cardioid (at 1KHz)
Connector: 3-Pin XLR / 3-Pin Mini-XLR / 3.5mm Mini-locking
plug (TS)
Wiring: Mini-XLR Pin 1 = GND, Pin 2 ➾15K Ohms ➾ Pin 3 ➾
Mic
Cable: 45” (114cm)
Boom length: 5” (12.7cm)
Weight: 1.9 oz
Foam windscreen included