Nady Systems DMP2 Musical Instrument Amplifier User Manual


 
NADY SYSTEMS, Inc.
6701 Shellmound Street • Emeryville, CA 94608
Tel: 510.652.2411 • Fax: 510.652.5075 • www.nady.com
(5)
GAIN CONTROLS
— Adjust gain for Channel 1 and 2 respectively.
(6)
PEAK LEDs
Channel 1 and 2 indicators light 5dB below clipping. Occasional fl ickering
on peaks is OK, but lower gain for that channel if lights continuously.
(7) XLR INPUTS — Connect to any microphone. Switch to phantom power only if requires
for either channel. Since this activates +48V to both channels, make sure other mic connected
will not be damaged by phantom power (eg. ribbon mics).
(
8) LIMITER BUTTON — Push
for added 15dB of limiting on both inputs simultaneously. For
best sound, use only sparingly as needed.
SPECIFICATIONS
Inputs
...........................................................................................
Ch 1 & 2 XLR Balanced Inputs
Maximum Input
.................................................................................................................
Maximum Input .................................................................................................................Maximum Input
250mV
Limiting
...............................................................................................................
15dB, selectable
Input Impedance
...................................................................................................................
10K
Ω
Maximum Gain
......................................................................................................................
50dB
THD
.........................................................................................................................
0.07% typical
Output Impedance
.................................................................................................................
300
Ω
Maximum Output Level
..........................................................................................................
3.5V
Controls
..................................................................
Power OFF/ON/ON w/+48V Phantom Power
3-way slide switch, Limiter OFF/ON push button switch,
Input Gain 1 & Gain 2 knob level controls
Connections
.........................................
Input 1 & 2 (female) and Output 1 & 2 (male) XLR jacks
Indicators
.............................
Power On LED, Peak 1 & Peak 2 LEDs (light 5dB before clipping)
Power
...................................................................................................
Power ...................................................................................................Power
Single 9V Alkaline battery
Current Drain:
Phantom Power Off
............................................................................................
Phantom Power Off ............................................................................................ Phantom Power Off
24mA no signal,
27mA max signal
Phantom Power On
............................................................................................
27mA no signal,
40mA max signal
Case
.............................................................................................................
All metal construction
Dimensions (WxHxD)
........................................
4.625” x 2.125” x 5.25” (117 x 54 x 133 mm)
Weight
.......................................................................................................................
Weight .......................................................................................................................Weight
1 lbs (454 g)
)
SERVICE
(U.S.)
Should your Nady DMP-2 Dual Microphone Pre-amplifi er require service, please
contact the Nady Customer Service Department via telephone: (510) 652-2411 or e-mail:
service@nady.com.
(INTERNATIONAL)
For service, please contact the Nady distributor in your country through
the dealer from whom you purchased this product. The warranty card supplied with this system
provides valuable warranty and service information. Store it in a safe place for future reference.
Do not attempt to service this unit yourself as it will void your warranty.