Filter
Top Products
6
7
8
9
10
11
6
FRONT PANEL CONTROLS
1
5
2
4
3
1. INPUT TRIM (GAIN SELECTOR)
3-way switch controls input level of both mono (Left) or stereo inputs. Select for
nominal 0 dBm, -10 dBm, or -20 dBm (MIC) inputs.
2. PAN/BAL
For stereo inputs, use as a Left/Right volume balance. For mono inputs, use as a
pan to place signal between Left and Right.
3. FADER 1 ~ 4
Adjusts the volume of the associated channel.
4. PEAK (PEAK INDICATOR)
The LED indicates when input signal to that channel reaches peak level. Set the
input gain select trim so the LED will light only occasionally at peak level.
5. EFFECT (EFF SND)
Adjusts the level sent to the outboard effect.
6. EFFECT RETURN
Adjusts the level returned from the outboard effect.
7. POWER INDICATOR
The LED lights to indicate that the power is switched on.
8. PHONES
Adjusts the volume at the headphone output.
9. AUX
Controls the input level from a second (cascaded) mixer or any other signal sources
(CD player, cassette deck, instruments, etc.) connected to AUX in.
10. PEAK L/R
The LEDs indicate when the master signal reaches peak level. Set levels so these
LEDs only light occasionally during use.
11. MASTER FADER
Controls the final, output level.