Filter
Top Products
SPECIFICATIONS
10
The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and appearance, are subject to change without prior notice.
POWER AMP OUTPUT
8Ω Total Impedance .................................. 100W RMS
4Ω Total Impedance .................................. 175W RMS
INPUTS
XLR balanced mic level ............................................. 8
1/4” TRS balanced/unbalanced mic/line level ............ 8
RCA Tape Input ......................................................... 2
CHANNELS
Level .................................................... Rotary Control
Effect ................................................... Rotary Control
Low EQ ................................................... 80Hz ±15dB
Hi EQ .................................................... 12KHz ±15dB
MASTER SECTION
Master Volume ..................................... Rotary Control
Delay On/Off ................................ Push Button Switch
Digital Delay Level ............................... Rotary Control
Digital Delay Time (80mS, 120mS, 160mS, 200mS) ............................................................................................4-position Rotary Switch
AUDIO
S/N Ratio ........................................................ >120dB
THD Power output, 20Hz to 20KHz ........................................................................................................................ <0.1%@100W/4 ohms
CROSSTALK (1KHz @ 0dBu, channel in to master output)
Channel fader down ........................................ <-65dB
FREQUENCY RESPONSE (Mic input to output)
Line level o/p @ +4dBu into 600Ω ...................... ±2dB
Power amp o/p 1 watt into 8Ω ............................ ±2dB
SENSITIVITY @ MIXER OUTPUT +4dBu with Master and channels controls set to MID
Mic/Line .................................................. -42dB/-22dB
Tape in ............................................................... -10dB
MAX INPUT LEVEL
XLR ...................................................................... -5dB
1/4” ................................................................. +16dB
MICROPHONE PREAMP E.I.N. (150( Terminated, max. Gain) .................................................................................<-120dBm
POWER CONSUMPTION ............................ 200W
POWER REQUIREMENTS .........................................................................................................105-125VAC, 220-240VAC, 50-60 Hz
FUSE .............................................................................. 5x20mm glass type 4A/250V for 115VAC, 2A/250V for 230VAC, fast-blow fuse
DIMENSIONS (H x W x D) .........................................................................................................6.8”x 17.5”x 9” (17.2 x 44.5 x 22.9cm)
WEIGHT ........................................... 20.6 lbs. (9.3kg)