Filter
Top Products
10
APPLICATIONS
Note: If the P.A. speakers are operated in mono,
the second channel of the MSE-100A can be used for
another application.
ENHANCING THE SOUND OF MONITOR SYSTEMS
The MSE-100A can be effectively used to improve the
sound of stage monitor systems. Here intelligibility and
transparency are of paramount importance during sound
reproduction. For this purpose, the MSE-100A is inserted
either in the “monitor send” path or between monitor mixer
and power amplifier.
SOUND ENHANCEMENT IN HI FI AND VIDEO
Of course, the MSE-100A can also be used in Hi Fi and
video applications. The unit is simply placed between the
signal source (cassette recorder, tuner, VCR, etc.) and the
power amplifier. We recommend using the “tape monitor”
inputs most preamplifiers provide, thus the MSE-100 A can
be switched into any signal source.
The NADY MSE-100 A can be used for improving audio
for:
• Disc and tape recordings
• Recorded video and audio cassettes
• Radio reception
• TV reception
Using the MSE-100A in a Hi Fi system
SPECIFICATIONS
INPUT
Type..................................RF filtered, servo-balanced input
Connectors ......................XLR and 1/4” TRS jacks
Impedance ......................24K Ω balanced,
12K Ω unbalanced
Max. Input Level..............+21dBu balanced and unbalanced
CMRR ..............................Typically 40dB, > 55dB @ 1kHz
OUTPUT
Type..................................DC-decoupled unbalanced
output stage
Connectors ......................XLR and 1/4” TRS jacks
Impedance ......................90 Ω balanced, 45 Ω unbalanced
Max. Output Level ..........+21dBu balanced and unbalanced
Bandwidth........................20Hz to 20kHz, +0/-0.5dB
Frequency Response......5Hz to 100kHz, +0/-3dB
Noise ................................> -95dBu, unweighted, 22Hz to
22kHz
THD ..................................0.008% typically @ +4dBu,1kHz
IMD....................................0.01% typically, SMPTE
Crosstalk..........................< -86dB, 22Hz to 22kHz
BASS PROCESSOR
Type..................................“Dual Mode” Bass Processor
Switches the bass sound
from “Soft” to “Tight”
Low Mix Control..............Variable (0 to 6; Off to Max.)
MULTIBAND PROCESSOR
Type..................................“Natural Sonic” processor with
“Variable Sound Processing”
Tune Control....................Variable (1 to 8kHz).
Process Control ..............Variable (Enhancer to Exciter)
High Mix Control ............Variable (0 to 6; Off to Max.)
FUNCTION SWITCHES
IN/OUT switches both channels, with red/green LED status
indicators
POWER SUPPLY
AC Voltage ......................100-120/60HZ or 200-240/50HZ
VAC as marked
Power consumption........9 watts
Fuse ................................T250mA, 250V
Power Cord Connector ..Standard IEC receptacle
DIMENSION
1.75” X 19” X 7.8” (44 X 482 X 197mm.)
WEIGHT
6.2 lbs. (2.8 Kg.)
Specifications and design subject to change without prior notice
for improvement purposes