The specifications above are correct at the time of printing of this manual. For improvement purposes, all specifications for this unit,
including design and appearance, are subject to change without prior notice.
10
SPECIFICATIONS
1. INPUT SECTION
2. OUTPUT SECTION
Input Connector Input Impedance Max Level
MONO CH MIC XLR BALANCED 44K Ω -21dBV 70mV RMS
MONO CH LINE 1/4” TRS BALANCED 1.8KΩ +8dBV 2V RMS
AUX INPUT 1/4” UNBALANCED 8.7KΩ +15dBV 4V RMS
EFFECTS RETURN 1/4” UNBALANCED 8.7KΩ +15dBV 4V RMS
TAPE IN STEREO RCA JACKS 7.8KΩ +15dBV 4V RMS
Power Output
8Ω Both Channels Driven (1% THD).......................................... ..........................................................................................105W RMS per side
4Ω Both Channels Driven (1% THD)..................................... ...............................................................................................150W RMS per side
Frequency Response............................................................................................................................................................ ...30Hz~19KHz +/-3dB
THD...................................................................................................................................................................................................................0.7%
Effect Send................................................................................................................................................................................. ..... 1/4 unbalanced
Output Impedance...................................... ............................................................................................................................ .....................150O
Max Output Level..................................................... ...................................................................................................................15dBV 4V RMS
3. MIXER SECTION
S/N Ratio.................................................................................................................................................................................................... .... -75dB
Noise Floor............................................................................................. ...................................................................................... ........... 6mV RMS
Treble EQ +/-15dB................................................................................... ........................................................................................... .......... 10KHz
Bass EQ +/-15dB................................................................................. ........................................................................................... ................ 90Hz
5 Band EQ +/-12dB ................................................................................................................................... ....... 60Hz, 250Hz, 800Hz, 2KHz, 8KHz
4. GENERAL
Power Requirements ..................... ........................................................................................Voltage selectable, 115VAC/60Hz or 230VAC /50Hz
Fuse Requirements...................................................................................................................... ...5x20mm glass tube F.B. 5A 250V @ 115VAC
2.5A 250V @ 230VAC
Weight .................................................. ............................................................................................. .......................................27.45 lbs. (12.5 Kg)
Dimensions (H x W x D) ........................................................................................................................ 10.3" x 16.9" x 12 (26.2 x 42.9 x 30.5 cm)