Filter
Top Products
6
Quick User Controls Guide
UHT-100 Handheld Transmitter: Front and Back
7
15. MIC BALL Windscreen
16A. LCD DISPLAY: CHANNEL Indicates channel
(00-99)
16
B. LCD DISPLAY: BATTERY Indicates battery status
from one (weakest) to five (strongest) bars.
Flashing “BATT” indicates low battery
16
C. LCD DISPLAY: TX LOCK KEY Indicates Power
On/Off switch is locked (see #20)
17. IR RECEPTOR SENSOR/WINDOW Infrared LED
sensor for linking the transmitter microphone
to the receiver during IR frequency downloads
18. OFF/STBY/ON Slide power switch to ON or OFF
to turn mic on/off, or to STBY to turn on power
with audio muted
19. BATTERY COMPARTMENT Holds two AA alkaline
or NiMH batteries—observe correct polarity
20. TRANSMITTER LOCK SWITCH Slide the switch
to ON to lock the TX, or OFF to unlock the
TX. (IR channel programming still functions
normally)
21. RF POWER HI/LO Slide the switch to HI for
more RF output, or LOW for less RF output—
consumes less battery power in this setting
and also better for simultaneous multichannel
operation applications
22. INTERNAL ANTENNA For best operating range,
do not handle this antenna during use
23. BATTERY COVER Slide open battery slot to
insert batteries
15
19
17 1816
16A
16C
16B
NADY
U HT-100
20
21 22
23
Quick User Controls Guide
UB-100 Bodypack Transmitter
24. ANTENNA Removable antenna—should be
attached during operation
25. OFF/STDBY/ON SWITCH Slide power switch to
ON or OFF to turn on/off. Set to STDBY to
turn power on with audio muted
26. INPUT JACK Locking 3.5mm mini-jack for
connecting audio input cord from lapel mic (LT),
Headmic
™
(LT/HM), or instrument (GT) cable
27A. LCD DISPLAY: CHANNEL Indicates channel
(00-99)
27
B. LCD DISPLAY: BATTERY Indicates battery status
from one (weakest) to five (strongest) bars
and flashing “BATT” for low battery
28. BELT CLIP On back of unit
29. IR RECEPTOR SENSOR Infrared LED sensor for
linking the transmitter to the receiver during
IR frequency download
30. LATCHING BATTERY COMPARTMENT DOOR
Slide open to insert batteries
31. BATTERY COMPARTMENT Holds two AA alkaline
or NiMH batteries
37. INPUT VOLUME LEVEL (On back of unit) Adjusts
input (LT/HM) audio level for optimal sound
40. INSTRUMENT CORD GT cable—connects
Instrument’s audio output to TX input jack
41. HEADMIC
™
Headworn microphone—connects
to transmitter input jack
42. LAVALIER MIC Lavalier (lapel) microphone—
connects to transmitter input jack
25 26
24
30
29
31
28
40
41
42
27
27A
27B
OFF O N
LO BAT
STDBY
UBT-100
IR
ASC
™
SYSTEM