Filter
Top Products
DM 1835X
BEATKEEPER TROUBLESHOOTING
T1 The BPM goes way off when using the search
button on my high tech CD mixer.
Some high tech CD mixers have a cueing feature which
allows you to cue precisely to an exact spot in the music so
you can slam mix. The only problem is that this mode repeats
the first beat of the music at a rate which is unrelated to the
actual BPM of the music. As a result, the BPM goes off track.
The best way to avoid this is to restart the music after a
search, make sure the Beatkeeper is resynced to the music
and then press the Cue button on the CD player. The
Beatkeeper will remember the BPM and track the music
once it starts.
T2 The Beatkeeper doesn't resync to the
downbeat of the music when the music restarts.
Either the downbeat isn't strong enough to be
detected, or the music was started well before a strong
downbeat. You can easily resync to the downbeat by
tapping the Beat Assist button once with the beat.
Alternatively you can cue the music to a strong downbeat so
that the Beatkeeper starts on this downbeat.
T4 Either the BPM display is blank, or it is
noticeably off.
This is common at the beginnings of songs where the
beat is not well defined. To sync simply tap the Beat Assist
button two or more consecutive times on the downbeat.
The Sync Lock LED turns on automatically, indicating that
the Beatkeeper is now tracking the beat of the music.
T5 The BPM display is correct, but the beat LED
isn't flashing on the downbeats of the music.
If this happens tap the Sync Lock button (turning the
Sync Lock LED on) and tap the Beat Assist button once to
make the Beatkeeper track the downbeat. You can also use
this to force the Beatkeeper to track an offbeat for more
advanced mixing.
Alternatively you may sync manually by tapping the
Beat Assist button 2 or more times on the beat.
T6 The Beats per minute number seems to jump
all over the place.
The Beatkeeper is analyzing different sections of the
music to find the BPM. If there is a temporary suspension of
a distinct beat or if the rhythm is too complex, this number
may not follow the actual BPM.
a) You can wait for a passage of music with a steady
beat for a more accurate BPM indication.
b) Hit the Sync Lock button once the red beat LED
starts following the beat
or c) Tap the Beat Assist button at least twice along
with the music beat.
Either method (b or c) will cause the Sync Lock LED to
turn and lock on, indicating that the Beatkeeper is now
tracking the music.
T7 It takes too long for the Beatkeeper to find
the beat on its own.
To speed up the BPM detection process, tap the Beat
Assist button at least twice. At this point, the Beatkeeper will
turn on the Sync Lock LED, immediately providing a BPM
estimate, while resynchronizing to the beat you tapped.
Numark - The Proven Leader in DJ Technology
©1997 Numark Industries 14 http://www.numark.com