Filter
Top Products
17
Selecting a sound source
Follow the steps below to adjust the level of each speaker if you
have selected MULTI-CH INPUT.
1. Press MULTI-CH INPUT button on the remote controller.
You cannot select any Surround mode.
2. Press the CH SEL button to select the desired speakers.
3. Use the LEVEL
π
/
†
button to change the volume level of
the speakers.
You can adjust the volume level of each speaker individually. Adjust
the level while listening to the sound in the listening position.
You can adjust the level of the front, center, and surround speak-
ers in the range between –12dB and +12dB.
You can adjust the subwoofer level in the range between –30dB
and +12dB.
If you adjust the level to +1dB or higher, the overall volume
level will not reach the maximum level when you set the MAS-
TER VOLUME control to its maximum. Refer to the Note on
page 16 for more information.
Either a digital or analog device can be connected to the digital
connector. Follow the steps below to select digital or analog
according to the type of the connected device.
Assume that you have connected a DVD player to the DIGITAL 1
connector.
Press the Input Selector button (DVD) repeatedly to select
“DVD DIG1.”
Pressing the DVD button repeatedly changes the display as
shown in the illustration on the left.
ANLG : Analog input
DIG1 : Digital input (DIGITAL 1 (OPTICAL))
DIG2 : Digital input (DIGITAL 2 (COAXIAL))
If an analog device is connected, press the Input Selector button
to select “ANLG.”
You can switch between digital and analog for the DVD, VIDEO-
1, 2, and CD input sources.
To cancel a digital input assignment, press the corresponding input
selector button until “ANLG” is displayed.
Even when the digital inputs are used, the analog connecting cables
must be left in place. Otherwise, the audio output from TAPE OUT
and VIDEO-2 will not work. (See page 7.)
Warning:
•
Do not play CD-ROM discs that contain computer data as they
may damage the speakers when the sound is amplified by the
receiver.
When Multi channel input is selected as a source
Switching between digital and analog inputs
DVD ANLG
DVD DIG1 DVD DIG2
DVD
DIGITAL 1
(
OPTICAL
)
DIGITAL 2
(
COAXIAL
)
DVD Player
TX-SE550
DIGITAL
1
1
2
POWER
SLEEP
DVD
VIDEO-1
VIDEO-2
TAPE PHONO C D LEARN
INPUT SELECTOR
DVD
KARAOKE
VOCAL
CANCEL
KEY CONTROL
DISC
GROUP
VOLUME
TAPE
DIMMER
TUNER
POWER
POWER
VOLUME
C H
TV/VCR
MUTING
LEVEL
REMOTE CONTROLLER
CH SEL
TEST
TONE
SENDING/
LEARNED
PRESET
PROGRAMMABLE AREA TV/VIDEO
TUNER
CD
MULTI-CH
INPUT
RC-386M
SUR
MODE
MULTI-CH
INPUT
LEVEL
CH SEL
POWER
SLEEP
DVD
VIDEO-1
VIDEO-2
TAPE PHONO C D LEARN
INPUT SELECTOR
DVD
KARAOKE
VOCAL
CANCEL
KEY CONTROL
DISC
GROUP
VOLUME
TAPE
DIMMER
TUNER
POWER
POWER
VOLUME
C H
TV/VCR
MUTING
LEVEL
REMOTE CONTROLLER
CH SEL
TEST
TONE
SENDING/
LEARNED
PRESET
PROGRAMMABLE AREA TV/VIDEO
TUNER
CD
MULTI-CH
INPUT
RC-386M
SUR
MODE
LEFT
L-SUR
CENTER RIGHT
R-SURSUBWOOFER