Filter
Top Products
Infrared Wireless Microphone: WX-LT100E, WX-LT310E
Infrared Ray Wavelength 850 nm
Number of Transmission Channel 4 channels (Sub carrier frequencies)
(1ch: 2.3 MHz, 2ch: 2.8 MHz, 3ch: 3.2 MHz, 4ch: 3.8 MHz)
Oscillation System PLL Frequency Synthesizer Method
Reception Range approx. 20 m
Condition
At the line of sight with using WX-LR100E & WX-LS100E
Microphone Type Unidirectional ECM
Frequency Response 100 Hz ~ 10 KHz (1 KHz standard 50 µs emphasis)
External Input Level 0 dBV ~
-
30 dBV
External Input Jack Ø3.5 miniature Jack
Required Battery AA type x 2, alkaline dry element battery
or Nickel metal hydride rechargeable battery
Battery Capacity Alarm Indication (at Power LED with ON)
Green Normal
Red Required to change or charge batteries
Operation Time (at 25 °C, continuous use)
Alkaline Battery approx. 5 hours
Rechargeable Battery approx. 6 hours
Dimensions WX-LT100E Max. Ø44.6 mm x 236 mm (Length)
WX-LT310E Max. 77 mm (W) 28 mm (D) x 102 mm (H)
Weight WX-LT100E approx. 140 g (excluding batteries)
WX-LT310E approx. 90 g (excluding batteries & Neck strap)
Finish WX-LT100E Black color / Infrared ray transmission acrylic
resin (Microphone head)
Silver metallic color (Microphone body)
WX-LT310E Silver metallic color (Control Panel),
Blue metallic color (Microphone body)
Infrared Receiver: WX-LR100E/A, WX-LR100E/B
Power 24 V DC (Using the attached AC adaptor unit)
Current Consumption 250 mA
Infrared Sensor Input 75 Ω F type Connector (for WX-LS100E)
Output power for WX-LS100E: 22 V DC, 100 mA Max.)
Number of Receiving Channel 2 channels (Sub carrier frequencies)
WX-LR100E/A 1ch: 2.3 MHz, 2ch: 2.8 MHz
WX-LR100E/B 3ch: 3.2 MHz, 4ch: 3.8 MHz
Receiving System TRF (Tuned Radio Frequency)
Frequency Response 100 Hz ~ 10 KHz
Dimensions 210 mm (W) x 44 mm (H) x 210 mm(D)
Weight approx. 1.1 kg
Finish Black color
Infrared Sensor: WX-LS100E
Power 22 V DC (Power source : WX-LR100E/A or B)
Current Consumption 20 mA
Infrared Ray Wavelength 850 nm
Sensor Output 75 Ω F Type Connector
Receiving Channel (Sub Carrier Frequencies)
Ch1: 2.3 MHz, Ch2: 2.8 MHz, Ch3: 3.2 MHz, Ch4: 3.8 MHz
Dimensions
Max. Ø113.5 mm x 34.5 mm (H), Excluding a projection for F type connector
Weight approx. 0.2 kg
Finish Black color / Infrared ray transmission acrylic resin
Battery Charger: WX-LZ110/G
Type of Battery Nickel- hydrogen rechargeable battery
Charging Time approx. 7 hours
Panasonic Infrared Wireless Microphones Transform Teaching!
These are actual comments from teachers:
Infrared Wireless Microphone System
raises the attention of pre-school children
to the lesson.
When using this Wireless Microphone,
children are more focused on the lesson
and are more willing to take part in it.
Even the children who never listened to
the teacher began to listen carefully and
to participate in the lesson. The best
thing that this microphone has given is
that it led the children to understand
more clearly what they are learning.
By using Infrared Wireless Microphone
System, elementary school students can
communicate throughout the classroom
smoothly because it adjusts their tone
of voice. Also, it raised their concentration
and no one chats with their neighbors
anymore, which enables us to use time
more effectively.
Even the students sitting at the very back
of the classroom can hear the teacher
clearly, so this Infrared Wireless
Microphone System has made them the
best class.
It is a benefit for us teachers also because
we are more focused on teaching than
trying to control the classroom. There
is no need for us to yell anymore.
At first, we had difficulty delivering our
voice to the whole class when teaching
because university classes are quite big.
I think Infrared Wireless Microphone
System has completely solved this
problem. Now, I can give a lecture without
having to project my voice. Also, one of
the best thing about this microphone is
that I can move around freely with gesture
since I do not need to stay at a same
place nor hold the microphone.
Panasonic Infrared Wireless Microphone
System has changed our style of teaching
and now we are adding more of them
into our university.
A microphone creates an environment where
everyone can concentrate
When this system is introduced,
everyone in the classroom
can hear what the teacher says
You may have had to speak loudly enough for
those in the back to hear.
For those in the front, that can be overbearing.
A microphone solves this dilemma.
Since everyone can hear what the teacher is
saying, everyone can concentrate equally.
Voice fatigue is
also reduced
It is no longer necessary to shout to
reach everyone in the room.
With a microphone, the teacher can
speak in a normal tone, and everyone can
hear what is said.
Teaching is less tiring, for teacher
and students alike.
Teachers
Benefit
Having both hands free
is so convenient!
Choose a pendant microphone
and both hands are free.
With a book in one hand, you can
gesture with the other.
Both hands are available to show
what you mean.
DISTRIBUTED BY:
• All TV pictures are simulated.
• Weights and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
http://panasonic.net/pss/sound/pa/
Printed in Japan (1N-784B)