Filter
Top Products
6
PREAMP OUT (29)
The preamp out can be used to route the amplified signal to a mixing console, tape recorder, etc.
Connect the preamp output using a shielded cable to an input of the tape recorder, mixer, etc. This
patch does not affect the operation of the amplifier.
EFFECTS LEVEL SWITCH (30)
Selects the effects loop operating level: -10 dBV (0.3V RMS) when “out” and 0 dBV (1V RMS) when
“in.”
EFFECTS RETURN (31)
Input for returning signals from external low-level effects or signal processing equipment.
EFFECTS SEND (32)
Output for supplying signals to external low-level effects or signal processing equipment.