Filter
Top Products
4
KKBB
®®
22//KKBB33
Keyboard Amplifiers
Thank you for selecting the KB2/KB3 keyboard amplifier. Once again‚ Peavey engineers have listened to input from
keyboard players and put together an amplifier that combines excellent features and sound in one portable package. The
KB Series amplifiers deliver awesome sound reproduction for all of your keyboard sounds—from thundering bass to
crystal highs—it’s all there!
Before you begin to play through your amp, it is very important to ensure the product has the proper AC line voltage
supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the
unit. For the KB3, an external speaker jack is provided for the additional use of an external speaker enclosure. This
feature is located on the rear panel as well and is also explained in this section. Each product feature is numbered. Refer
to the control and rear panel diagrams in this manual to locate the particular features next to their number.
Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.
FFeeaattuurreess
· 4-channels (KB2 and KB3)
· KB2: biamped 45 watts and 12 watts
· KB3: 80 watts external‚ 60 watts internal
· balanced line out
· effects send/return jack
· external speaker capability (KB3 only)
EENNGGLLIISSHH
QQUUIICCKK SSEETT--UUPP GGUUIIDDEE
1. Connect the line cord to the appropriately rated receptacle
2. Be certain that all levels are down or set to the fully counter-clockwise position and set
all the EQs flat
3. Set the master level to the 12:00 position
4. Connect left output of your keyboard to the left input of the KB2/KB3 and connect right
output of your keyboard to the right input of the KB2/KB3
5. Set the DDT switch to the enable position
6. Set the main/monitor switch to the monitor position
7. Turn on power to the KB2/KB3
8. Adjust the channel level for proper volume
9. Adjust the channel EQ as needed