Filter
Top Products
9
((88)) HHeeaaddpphhoonnee IInnppuutt
This standard 1/4" input jack allows you to connect standard headphones to the MAX
®
126. Turn the
Vintage and Gain controls all the way down before using headphones. Slowly turn up the volume and
find a comfortable listening level. Remember, starting out on the bass with hearing damage would
not be much fun! When headphones are connected to the MAX 126‚ the speaker is automatically
turned off.
((99)) PPoowweerr LLEEDD
This LED illuminates when power is supplied to the MAX126.
((1100)) PPoowweerr SSwwiittcchh
This two-way rocker switch applies power to the unit when placed in the ON position.
PPOOWWEERR AAMMPPLLIIFFIIEERR
RRaatteedd PPoowweerr::
10 Watts RMS/8 Ohms,
nominal @ 1 kHz, 120 VAC line
PPoowweerr CCoonnssuummppttiioonn::
((DDoommeessttiicc))
26 Watts, 60 Hz, 120 VAC
((EExxppoorrtt))
26 Watts, 50/60 Hz, 230-240 VAC
PPRREEAAMMPP
The following specs are measured
at 1 kHz with all controls preset at
5.
CClleeaann CChhaannnneell::
Nominal Input Level: -20 dBV‚
100mV RMS
Maximum Input Level: -10 dBV‚
300mV RMS
VViinnttaaggee CChhaannnneell::
Nominal Input Level: -18 dBV‚
125 mV RMS
Maximum Input Level: -10 dBV‚
300 mV RMS
TTaappee//CCDD IInnppuutt::
Impedance: High Z‚ 22 k Ohms
Nominal Input Level: -6 dBV‚ 500 mV
RMS
HHeeaaddpphhoonnee OOuuttppuutt::
Nominal Output Level: 100 mV into
8 Ohms
(Disconnects internal speaker when
used)
SSyysstteemm HHuumm && NNooiissee @@
NNoommiinnaall IInnppuutt LLeevveell::
(Clean channel‚ 20 Hz to 20 kHz
unweighted)
Greater than 70 dB below rated
power
DDiimmeennssiioonnss ((HH xx WW xx DD))::
11.00" H x 11.20" W x 6.75" D
(280 mm H x 283 mm x 170 mm)
WWeeiigghhtt::
11 lbs. (5 kg)
SSPPEECCIIFFIICCAATTIIOONNSS