Filter
Top Products
vi 1
INSTALLATION STEPS
The AC power supply is shown installed and
plugged in to a standard wall socket on the
Installation Overview (see page v).
The Switcher amplifier requires power to work
with most phones.
Power is not required for:
• Lucent Merlin
®
, System 75/85 phones
• Lucent Definity
®
and 8400 series phones
Installing batteries
We recommend an AC power supply (included).
Two AA alkaline batteries (not included) may
also be used, but batteries will need to be
replaced frequently.
1. Remove the Battery Access Door located on the
side of the amplifier by placing your thumb on the
door and pushing down.
2. Install two AA alkaline batteries and replace the
door.
3.You will hear three “beeps“ through the head-
set when the batteries are low.
english
install
in 5 easy steps
PLUG INTO POWER SOURCE
CONNECT TO PHONE AND
HEADSET
SET DEFAULT SETTINGS
SET TELEPHONE/AMPLIFIER
COMPATIBILITY SWITCH
CONNECT TO AN AUDIO
DEVICE
I
PART
STEP
1
plug into
power source
Switcher.biling.ii-25 11/4/98 7:58 PM Page vi