Filter
Top Products
Instructions for using the Shock Mount:
1. The SGM1 Microphone must be properly threaded through the silicone bands.
Please see photo for proper band placement around the microphone:
Note how SGM1 Microphone is threaded through the silicone bands
2. Install the foam windscreen for all outdoor use and for indoor use where air-
conditioning rumble may be a problem.
3. Install the Koala MiniMax tm High Wind Fur Cover when working outdoors in high
wind conditions. To install the Koala MiniMax Cover, carefully pull it over the
foam windscreen. Secure with the attached Velcro straps.
4. To change from one adapter to another simply remove the thumbscrew located
on the base of the shock mount and replace the adapter with the other style. Be
sure to include the rubber washer between the shock mount body and the
adapter. This same thumbscrew can be used to tilt the microphone up or down
on it’s axis. Simply loosen the thumbscrew and reposition the microphone to
your desired position and then re-tighten the thumbscrew.